UK S2000 Exhaust Mod

We'd like to share some of the performance work going on the shop today -- the UK S2000 exhaust mod. This mods diverts a portion of the exhaust flow past the first part of the twin-loop muffler for a more pleasing exhaust note without the typical droning of common aftermarket exhausts for the S2000. We use a 1" stainless U bend and cut to fit. Here is a picture of the tube held up for fitment check.



Work begins on the UK S2000 exhaust mod. Cutting the stock exhaust for the stainless bypass tube.



Next the we grind the opening for exact fitment.



TIG welding the stainless bypass pipe completes the UK S2000 exhaust mod.



Complete UK S2000 exhaust mod. Ready to test on the dyno!

http://www.kingmotorsports.com/c-173-dyno-tuning.aspx



We've had lots of requests for dyno results after the UK S2000 exhaust mod- so here ya go. The customer AP2 S2000 is equipped with a header and test pipe and tuned using a Hondata K-Pro. Blue line is with the stock AP2 exhaust, the red line is the UK mod AP2 exhaust. A slight increase in power with the UK mod, but most importantly the exhaust note has improved dramatically. Nice and mellow without any harshness building to a pleasing wail at 9000 rpm- just what the customer wanted...





Project Archives: Mugen-equipped S2000

Some of you may remember this black beauty that King Motorsports built out and equipped with quite a few Mugen goodies!

See more pictures of this S2000 in our Facebook gallery.



ENGINE
Mugen Stainless Steel Header
Mugen Stainless/Titanium Cat-Back Exhaust
Mugen Carbon Fiber Airbox
Mugen ECU
Mugen Hi-Pressure Radiator Cap
Mugen Low-Temp Thermostat
Mugen HP Clutch Pressure Plate


SUSPENSION
Moton Double Adjustable Shocks w/ Remote Reservoirs
Hypercoil Spring Set
Mugen 31.8 mm Front Stabilizer Bar
King Motorsports Bumpsteer Kit
Mugen MF-10 Wheels: 17x7.5 & 17x8.5
Bridgestone S0-3 Tires: 215/45 ZR17 & 245/40 ZR17


AERODYNAMICS
Mugen Carbon Fiber Hardtop
Mugen Rear Spoiler
Mugen Front Half Bumper Spoiler and Undertray


See more of our performance parts for the S2000 at our online store:
http://www.kingmotorsports.com/s-94-s2000.aspx


Around the Shop: 2013

When we aren't building race cars or getting the most potential from engine builds, we have plenty of other things to keep us busy. Here are a few examples!


In the shop today: Comprehensive dyno development program completed for the multiple time SCCA ARRC championship ITA CRX. Now on to corner weight and four wheel alignment. You can see another pic of this CRX on the King Motorsports Instagram feed.

http://www.kingmotorsports.com/c-326-wheel-alignment.aspx



In the shop today- assembling a close-ratio K series transmission for a Lotus Elise with a K swap-nice!

http://www.kingmotorsports.com/c-296-transmission.aspx



In our fab shop, we just finished up TIG welding an EGT bung to this S2000 header. This S2000 will be the test bed for the upcoming revised Kraftwerks SC kit.... More details to follow!

http://www.kingmotorsports.com/e-DM_ProductsPerMfgAndCategory.aspx?CatID=257&ManID=84



Have you checked your rear trailing arm bushings lately? 95% of the cars that we see for service have badly deteriorated rear trailing arm bushings. This condition can lead to very unsafe handling. Here we have just installed a set of PCI rear trailing arm bushings in an 88-91 CRX rear trailing arm.

http://www.kingmotorsports.com/m-78-pci-procar-inovations.aspx



Heading to the track this season? Consider a set of ARP hardened, extended wheel studs. Cheap insurance against bad things happening....

http://www.kingmotorsports.com/e-DM_ProductsPerMfgAndCategory.aspx?CatID=308&ManID=6

Mugen Nostalgia: F1 and Track Apparel (Updated)

A little Mugen nostalgia to start off your November!


Damon Hill signed this Jordan Mugen hat for us at the Canadian Grand Prix in 1999 after a great lunch with the Jordan boys. This was Damon's last year driving in F1 and it was clear he was tired of F1. His team mate Heinz Harald Frentzen, by comparison was having a tremendous season and was full of energy and was all smiles......



These Mugen hot fingers gloves were standard issue for all the Mugen mechanics working in the field circa 1989-1990.



Here's a Mugen Sports team jacket circa 1989. Very cool to wear at the track back in the day. Shown here propped up Mugen's new MS-Z Semi Bucket Seat.



Update 2/14/2013:


Here is another great Mugen jacket circa 1998; part of the Mugen/Honda F1 racing team collection.



Update 3/16/2013:


1999 Mugen/Honda Formula 1 team gear...


Mugen Fit spec. D Concept



Some Fit love! ... The 2007 Mugen Fit spec. D concept car. We've always admired the Fit for its versatility and sporting character- always punching well above its weight!

The concept features a mean "power bulge" hood reminiscent of the RSX Mugen hood. A gunmetal grill and Mugen badge class up the front end. Gunmetal Mugen GP wheels fill out the chiseled widebody kit that elaborately transforms every panel and door on the profile of the car.





We currently have quite a few Mugen performance parts on sale for the Fit!

http://www.kingmotorsports.com/c-342-mugen-honda-fit-sale.aspx

Mugen Helmets

Here are a few rare helmets made by Mugen (to keep your skull safe while you're chasing the crown).

This all-white, super clean helmet was available in the late 80's.



And here are pics shared by Shaun J. of his NOS 80's Mugen helmet -- beautiful!





Mugen Factory: Machining Center



Here's a glimpse of the inner working of the Mugen factory- the Machining Center. The entire Machining Center is built on a giant pad that absorbs any vibrations caused by seismic tremors that could cause the sensitive machinery to go out of calibration.





Honda Daily Drivers: Beater with a Heater

**The following is a post from blog contributor Perry Nation and in no way reflects the complete opinions of the KMS staff and in fact we feel even more strongly about these cars than Perry has expressed.**


Tucked away in the King Motorsports Facebook page is some kind of button that allows ordinary civilians to share pictures of their Honders. And this makes me very happy. I want to share some of these pictures with you blog-reading people. These are the cars I would drive if I were banished to Winterfell.


This daily driver was shared by Justin F. Lowered on stockies, nice and tucked with special windshield spiderweb design, offset and marbled passenger front fender and CF-inspired hood. Special seat covers protect the OEM seats. Additional ventilation beneath the passenger side headlight brings in extra cooling to the brake system. This Civic is as much at home on the track as it is in the backyard next to that concrete well that came with the house!



This beaut was sent in by Charles M. Best to let him introduce us to his EF: "last pic of the first car 365k on the clock before i took it off the road because of rust. It had koni yellows purchased through king motorsports back in 1990 by my father for his 85dx (bought new in 84) also had the jackson racing springs, JR short shifter, JR front and rear sway bars and JR Bushing kit. and it had a 13" momo monte carlo purchased new in 1990 by my father. plenty more done but this is what was taken off my dads old 3g. right after this picture i upgraded the injectors, added a hedman header and a side pipe. Miss this car but not that much since i have a better 3rd gen now ;)"

Charles we are loving your black-on-red color scheme with the meaty tires and the bold primer patch with color-matched gas tank fill door. Photographically speaking this is a work of art and we appreciate how the architectural and parking lines accentuate the subtle, shy curves of your EF. The green PARK sign is the icing on the cake and brings the perfect STOP-NO-NEVERMIND-GO-palette balance to your red masterpiece. Also you must have been very close to the ground to take this picture.



Here is a proper EF wagon from Shawn D. Shawn has *only* cultivated a wee bit of rust so far because he is busy chasing down his true automotive passion, which is finding and then parking in front of ridiculously large red doors. We see some rust starting at the taillight seam which is encouraging and a good start! Shawn you must be as tall as Chewbacca because those front seats have become back seats.



Yia L. wants ya'll to meet the Red Rocket: "93 civic Dx, d16z6 swapped, 261k on Chassis, 264k on engine. rear ended so the trunk does not seal, smells like exhaust in cabin when the front window is cracked/opened. This is truly a beater with a heater! Did I mention snow tires up front for extra Wisconsin traction?"



This 93 Civic Si was shared to us by Unikeone D. He bought this green EG gem because the heater went out in his 4 door Civic. The EG has become his garage project car and presumably has heat. It's got special features like lightweight steelies up front, universal 4-lug alloys in the rear and just enough rust to let people know he's serious about living where it snows. Unusual sheetmetal deformations above the rear wheel wells belie the hidden mysteries of this car's past -- was it stanced beyond sanity? Was there a fender rolling session using a 20" rim and a speed bump? Did a snow chain that should have been installed on the front tires come loose and tear up the inside of the fender? As it is with roommates you find on Craig's List, used cars should have some secrets that you discover when you are tired and vulnerable. The rear end features defensive metallic protrusions that can knick the shins of any would-be thieves.



Dustin's Ek hatch makes me cry, bitter, rusty tears of desire. My mind wanders to days of youth, when camel statues were still magical and when hiding people inside cartop carriers was not illegal but instead encouraged. We hope to see thee again at Dyno Day, Dustin. Don't make us beg.


This next beater with a heater is owned and driven by Alvin S., which clocked an impressive 313,763 miles and counting. He's opted for a unique rear wiper *BLADE* delete, rather than the more pedestrian rear wiper *arm* delete. Alvin must work with reptiles, because there is a snake escaping from the trunk and wrapping itself around the muffler. The front seats have been upgraded to racing hammocks with ultra rare JDM material sourced from Babies "R" Us.






This Geo Metr- er, Honda Civic was shared with us by Mikle I., direct from Hungary. His Civic features custom time attack steelies, a Christmas-inspired paint job, and is the very rare lightweight bumperless edition EF that Honda only briefly offered overseas (the stuff we miss out on due to over-zealous US safety standards...). We do like the door and window trim delete, which is popular in Europe. Also, Mikle, we caught you sporting that Mugen sticker on the hood, and you know what? We are proud. There is something poetic happening there with your gas tank fill door, like some kind of stencil/spraypaint experimentation that is perched on the edge of self-discovery. Keep up the good work!




Shulong X. shared this amazing 1994 Integra DC2 LS with us. This picture was taken from a moving tram during the Universal Studios Hollywood backlot tour, which passes by famous retired film cars. That's right! This is the "Silver Flame" Integra featured in the "Jurassic Parking" TV series! Only 7 of these "picture cars" were made, 5 of which were destroyed during filming the 2nd season of the show. 1 was shipped off to the Smithsonian, and this last remaining car was actually driven on set by Gary Coleman in season 4. It features a full working interior and an upgraded suspension that has been replaced numerous times due to all the jumps it was featured in.