Mel Diego's Mugen EP3

We had to share Mel Diego's 2003 Mugen EP3- Love it!!! Thanks Nosilla Yo for this pics! See the full write up of his incredible build over at Honda Tuning!



The interior of Mel's EP3. Nicely done!



One of our favorite parts of Mel's EP3 build is the Stack dash....



Mugen EP3 Civic aero body parts are still available (except for the radiator grill)!

http://www.kingmotorsports.com/e-DM_ProductsPerSecAndCategory.aspx?CatID=241&SecID=276


King-built Motor: 1984 Honda CRX (SCCA C-Street Prepared Battles)

** The following was sent in via our Facebook page by YAWSPORT -- thanks guys!! **


1984 Honda CRX built from the ground up for SCCA C-Street Prepared battles.

 

Mugen header, Mugen Limited Slip, all Mugen suspension bushings and engine mounts. The EW1 Si motor was meticulously blueprinted and balanced by King Motorsports. Other modifications include TWM individual throttle bodies, Electromotive Tech 2 engine management, YAWSPORT adjustable pan hard rod, YAWSPORT adjustable rear sway bar, custom camber/caster plates and 27.5mm front torsion bars, 13x9" Panasport wheels.

 

Nearly every part of the car was new, refurbished or modified. The entire uni-body was stripped, powder coated white, then all seam filler and undercoating reapplied. It scaled in at well below 1600 lbs with 3/4 tank of gas. It was complimented by many to be the cleanest, most thoroughly prepared autocross CRX's in the country and the car and its drivers accumulated numerous Regional, Divisional and National podium finishes from 1996-2001. This included an open class win at the 1998 SCCA Pro Solo finale and a second place finish in Open and Ladies class at the National Solo Championships in Topeka Kansas. The car is still alive and well with its new owner and the original King-built motor is still running as strong as ever.




KMS SS2000, KMS S2200, and S2K Days 2001



Back in April 2001, we made it out to the S2000 (S2K) Days in Asheville NC. The King Motorsports SS2000 and S2200 join the S2K crew for a spirited drive amongst the scenic Blue Ridge mountains. Photos courtesy Juliann Pokorny (Thanks Juliann!!)


What we consider the best shot of the SS2000! From the West Coast beat down tour :)




Commander Brad leads the pack and receives his first Honor Badge of the trip- when a rock flies off a passing car and lands squarely on his hood- OUCH! We pull over to commiserate....




The KMS SS2000 and S2200 pause for photo op in the Blue Ridge mountains.




Here's the OG KMS facility in Sullivan WI.  The "Mistress" is being serviced with the GAC ITR on the rack between races. From the looks of the front bumper Bob may have wanted to occupy the same space as the car in front of him..... :)




The SS2000 at Laguna Seca. IIRC the NA SS2000 put all the boosted West Coast S2000's to shame that day. Just sayin......


Kevin Bonneau's SCCA ITA CRX

1998 Road Atlanta ARRC race: SCCA ITA CRX driven by Kevin Bonneau, prepped by King Motorsports.



Getting really aggressive with the curbing became the key to a good lap time after Road Atlanta was reconfigured. Here Pierre Kleinubing demonstrates :)



1998 Victory lap for Kevin Bonneau in the KMS prepped ITA CRX. Back then the ITA fields were quite large and the CRX was the dominant car. Now the fields are smaller, and the CRX is still a front runner! What a great car!



Mugen Cat Back Stainless Steel Exhaust for 8th Gen Civic Coupe/Sedan



Here's your chance to get a Mugen exhaust for your 8th Gen Civic coupe or sedan!


As with all Mugen systems, the 8th Gen Coupe setup is perfect in fit, finish, sound and performance. This amazing system features all-stainless steel construction, perfect mandrel bends -- finished with a polished tip with the Mugen logo laser etched into it. The piping is 60mm and both the front silencer and unique 3-sided rear muffler are perfectly constructed from stainless steel.

 
And the sound is all Mugen - deep and throaty when you're on the throttle, mellow at cruising speed. No droning or rasping, just that signature Mugen tone. Listen to a sound clip on YouTube.


For a limited time the 8th Gen Mugen Cat Back Stainless Steel Exhaust is only $1125 plus shipping. For the sedan version, add $75 for our custom-fabricated adapter (pictured below).


Here are pictures we took recently of the system installed on a customer's 8th Gen Civic Si sedan!







King Motorsports / Mugen Dyno Day 2012

 

Our 2012 Dyno Day was the most memorable yet! It was a huge success! The weather was absolutely perfect!

 

Held annually at our facilities in New Berlin, Wisconsin, this year's Dyno Day was on Saturday June 2.

Thank you to the hundreds of dedicated attendees who polished and primed their rides unto perfection to show, compete and connect at this year's annual King Motorsports event. We had so many cars that we overflowed beyond our own street this year! New this year we added a detailing professional and dent repair specialist to the mix. Returning talent powerhouses included the amazing tunes of Deletah, pics by NoggsPhotography, BBQ by Boy Scout Troop 93 and shirt design by Perry Wang.

We can't forget our four-wheeled guest of honor, the Mugen Concept CR-Z: RR! This orange mechanical work of art was shipped over 6000 miles from Mugen's Tokyo showroom to New Berlin, WI just for our event! It was one of the very few times a Mugen concept car will ever be seen Stateside, and we were proud to have his one-of-a-kind beast briefly under our roof.

The persistent enthusiam of the attendees make all the hard work put in by our staff worth it every year. We had 250 entries and ran 32+ cars on the Dyno.

Already planning for Dyno Day 2013!!!!


This year's pictures can be viewed on our Facebook page:

https://www.facebook.com/media/set/?set=a.10150829609646319.396707.110076751318&type=3

 

Also see Rob Delimat's awesome photos that he posted on honda-tech:

http://honda-tech.com/showpost.php?p=47441827&postcount=1

 

And another gallery of pics on 8thCivic.com:

http://www.8thcivic.com/forums/introduction-pictures/295238-king-motorsports-dyno-day-2012-project-x-pics.html


 

Causing a Scene: Urban Disturbance

 

 

It was just after 8am. The weather was looking good. Big Mike and other staffers were hauling the goodie bags out to the welcome tent. Although we still had about an hour to go before the start of Dyno Day 2011, the first cars were already rolling up. The Urban Disturbance car club had arrived early, and they had big plans for the day. They settled into choice parking spots and set up a portable tent of their own (complete with their website URL). Throughout the day the members would impress the hundreds of attendees with their clean builds and jaw-dropping dyno runs. By day's end, Urban Disturbance proudly picked up the lion's share of awards. Their members took home awards from 3 of the 5 categories: Spirit of JDM, People's Choice, and King of the Dyno. From start to finish, this club stole the show.


Who is Urban Disturbance? We interviewed their members about its influential club, their rides, and their connection to King Motorsports.


How did Urban Disturbance start?


Urban Disturbance (UD) Car Club started in 1998 with mini trucks and low rider styled vehicles.


The club was formed by Chris McCauley (now referred to as ‘The God Father’) along with a group of friends: Jon Jezo, Chuck Glissendorf, Kris Walker, and Matt York. It all started right from the roots of many of today’s enthusiasts: custom built vehicles, built in a driveway garage with no luxuries, special tools, or sugar daddies.


How many members do you have today? What kind of cars do they drive?


Currently we have 25 official members. Most of them have sport compact cars but there are vehicles of all types -- trucks and bikes too. Although we dominate with Hondas, we are receiving applications from all makes and models on a daily basis.


Which members and cars are the most influential in the club?


As a club we are all influential to each other, we push everyone to do bigger and better. Spaz is known as our head mechanic, most people bring their cars to his garage for modifications and repairs. Spaz has an '05 RSX K24 swapped, supercharged and tucked. Chuck (aka “Chucks Tucks”) is influential for many who want that clean tucked engine bay -- they go to him. Ole (2x "Spirit of JDM" & "People’s Choice" award winners) has a shaved & tucked, RHD true JDM ITR DC2 that everyone drools over. And our club President, Jezo, has built a 500+whp 4cyl beast RSX that gets plenty of attention (2x "King of the Dyno" winner).



Were there any runner-ups names for the club?


"Driveway Customs" & "Disturbed Customs."



Are there requirements to join the club, and how does someone join?


Anyone can apply to join by simply filling out our online application and sending three photos of their ride. Our requirements consist of a vehicle that is complete, street ready or a quality build with progress demonstrated.  New members have a probation period in which they must attend 3 events in a season, such as car shows, meets, track days, etc. (at least one event being with your ride). 


What kind of events and outings does the club attend and how often?


Our club enjoys going to local, regional, and national auto events to show or race our rides and to just look at the latest trends and styles. We also love track days at the local autoX spot, drifting spot, or Union Grove Great Lakes Dragaway (Import Wars) and Byron Race Tracks.  This year our club attended a huge event called Import Alliance with over 10,000 other enthusiasts in Nashville, Tennessee. Almost every weekend day you can find our members at an event of some type.



Is there a city that the club calls home base?


Janesville, WI is the home base of UD.  We now have an Illinois chapter and are accepting applications for new members and chapters everywhere!


What makes Urban Disturbance different from other car clubs?


We try to keep a good strong mix of everything. From high horsepower builds, to full engine shave and tucking, to full custom air ride, track, autocross, drifting etc. This way our club can get out, adapt and grow everywhere we can.  We take great pride in our rides and want to support the scene in a classy manner.



How did you come to know and work with King Motorsports?


Anyone truly passionate about Hondas knows the famous King Motorsports. Since we're mostly in the Honda scene, we are all fans of King Motorsports. Several members have bought parts, gotten tuned, and visited the facility. Also King is one of the few tuner shops that you can order quality parts from... including official Mugen parts


You guys really cleaned up the awards at King’s Dyno Day 2011!  Any advice for people who want to create award-winning builds?


Come to us! LOL. Seriously though, just take your time and do things right. The problem with builds we see online is there are too many people buying cheap "eBay knock-off" parts. Everyone buys a Honda and says "yeah I’m gonna boost it…blah blah blah," but talk is cheap. Money is the issue. So take your time, build it right. Better quality parts = better results every time.


Over the years, what type of tuning or work has King done on member rides?


King was the influence for Spaz doing an Electronic Power steering swap in his DC5. According to the forums the 2005+ RSX-S cannot use EPS without a speedo healer converter but with the help of King Motorsports they were able to figure it out and his EPS works great.   Another member, Ahmad, has gone through King Motorsports for a lot if not all his parts.




What makes King different from other shops like it?


Quality. King Motorsports is the high end of dealers, mechanics, and engineers. There are plenty of tuners and shops, but none of them with the reliability and reputation as a place like yours. To most people, when you see a car built by King you knows it’s quality and built right!


Do you have any stories about King Motorsports you'd like to share?


Anyone who hasn’t been to King Motorsports for their annual Dyno Day needs to check it out!

 

Parting thoughts?


No matter what happens in life you can’t let it get you down.  If cars are one of your passions don’t let it get away from you.  Cars come and go but the passion remains, find it and keep the scene alive.


To all the other Honda, import, and auto enthusiasts out there: Please remember to support the scene, give back to the next gen, and skip that last helping of rice.




>> For more information about Urban Disturbance (including membership, show calendar, forum and club store) look them up at urbandisturbance.net.

More Mugen for John Hinrichs' CR-Z!

John Hinrichs really likes his Honda CR-Z. Apparently he also really likes Mugen.


For his fourth major Mugen modification on his CR-Z, John opted for a set of Mugen 17x7 GP wheels in Gunmetal. As with his other mods, John worked directly with King Motorsports President and CEO, Scott Zellner. Scott: "The color of the Gunmetal GP's are a perfect compliment to the Black CR-Z." John is equally happy with his purchase, "I love the way these wheels look!" After each upgrade, John usually sends a picture and a note, or stops by to show us the results, as he did recently with after the GP wheels were installed.


John's other Mugen mods are the Mugen 5-Way Sport Suspension, Mugen Carbon-Fiber Air Intake and Mugen Cat-Back Exhaust.

 

 

 

 

 

 

 

 

 

Customer Ride: George Doganis

**

George Doganis is a Rally and Solo/Pro Solo Racer and long-time customer of King Motorsports.

 

He has multiple championships including:
4 California Rally Series Class Championships ('06,'07,'08,'10)
Bilstein Rally Cup(2010)
4 SCCA Solo National Championships
2 SCCA Pro Solo National Championships

 

 

George's rally car is a fully-prepped EK hatch. His latest King-supplied additions include WPC-Treated Gear-X close-ratio gears, Mugen Limited Slip Differential, and AEM adjustable cam gears.

 

Other notes on his car:
The car is built with an FIA-standards cage for Rally America/NASA 2WD class. The shell has been seam welded and strengthened in critical areas. Suspension has been reinforced and some of the links have been replaced with heim-jointed, chrome-moly custom pieces. Shocks are modified Bilstein units. Steering quickener was added and PS pump modified. Engine is 2-liter B-series VTEC. Trans has Gear-X gears (WPC’ d as well) and Mugen LSD. Brakes are Fastbrakes 11” F&R. Gravel tires are Pirelli(as of the next event) on Team Dynamics Pro Rally 1 wheels.

 

Congratulations on all of your success George!